With decades of combined industry knowledge and installation techniques, you can rest assured you're in good hands. For all you DIYers out there, we've put together a video guide on having your synthetic turf correctly installed.
Some of the results are here for you to see.
We're confident that our product range and installation service are the best in the industry. Customer satisfaction is our number one priority. We welcome the opportunity to work with you and transform your area into something we will all be proud of.
It's great that you're looking at installing a premium product in your yard or commercial space. While our Artificial Turf is extremely versatile, it is essential that you install it correctly.
We know that there is nothing worse than spending money on a product only to have the installation go horribly wrong. So, follow the below guide when you install your Artificial Grass and you'll have a fantastic usable space that will last for years.
We begin by assessing your site (access point(s) and width), and determine whether the existing vegetation, stones, mulch, pavers etc need to be removed. We then calculate how much sub-base is required. This should be a MINIMUM of 50mm depth of compacted crusher dust.
If more than a 50mm depth of base materials are required, use compacted Road-base first, then dress with 50mm depth of crusher dust.
Remove the existing lawn, stones, mulch, pavers (note: if pavers, tiles or concrete is in good condition, we can install directly on top of these). Level, compact and grade the sub-base to aid water flow to existing drains or garden beds. This is an important step in your installation and failing to complete this properly may lead to flooding.
As a rule of thumb, we leave a 10mm set-down to any paths, stepping tiles/pavers to ensure there is no trip hazard. Depending on the height of your termite line or weep holes, and what type of termite barrier you have installed, we need to ensure a 75mm visual clearance is adhered to.
The Artificial Grass is then fitted and secured. The method of securing the turf is determined by project site. If installation occurs over crusher dust we strongly recommend a cement perimeter be formed up in which to glue the artificial turf on to (the cement perimeter remains hidden under the synthetic grass). If installing over a hard substrate like concrete, CFC sheeting, pavers etc a direct stick with adhesive is all that is required. No sand or rubber infill is required.
If you would like more information on fitting and securing methods, please contact our team.
Those with the desire can use their DIY skills to install our Synthetic Grass in their own yards. There's a lot to know when it comes to our individual products and the correct method for their installation. Although we recommend our professional team install our Artificial Turf, we can provide installation instructions to assist you if you have the necessary DIY skills to perform the install yourself.
Watch our quick video for a walk through of our installation process, and of course feel free to contact our team if you are looking for any advice.